Products Features:

• Low-Frequency probe compenstion
• Before taking any measurements using a probe, first check the compensation of the probe and adjust it to match the channel inputs.
• Most oscilloscopes have a square wave reference signal available at a terminal on the front panel used to compensate the probe, Connect the probe to the signal source to display a 1 KHz test signal on your oscilloscope.
• Attenuation:1*/10*
• Input registance:1 MΩ;10 MΩ
• Input capacitance: 1*:85pF – 135pF;10*:18.5 pF – 22.5 pF ,16 pF - 20 pF
• Compensation range: 15 pF – 45 pF;10 pF – 35 pF
• Bandwidth:

1. 1*: DC 6MHz
2. 10*: DC 20MHz/40MHz/60MHz/100MHz/150MHZ/200MHz

• Rise time:

 

1. 1*: ≤58ns
2. 10*: ≤17.5ns ≤8.75ns ≤5.8ns ≤3.5ns ≤2.3ns ≤1.75ns

• Working voltage: 1*: ≤300V DC；10*: ≤600V DC
• Net weight:64g
• Cable length:120cm
• Operating:-10℃--+150℃,Non Operating:-20℃--+75℃
• Humidity: ≤85% relative humidity

 

Items Included:

• P6000 high voltage oscilloscope probe×1

 

There is no compare price information yet, please check it later.

There is no movie for this item currently.